DSLAM ZXYEL IES 1000

DSL1-D1-BD config> print
Module ‘bridge’:
Active configuration:
Port  1 (ethernet): ‘edd’
Port  2 (gshdsl1): ‘xport/1’
Port  3 (gshdsl2): ‘xport/2’
Port  4 (gshdsl3): ‘xport/3’
Port  5 (gshdsl4): ‘xport/4’
Port  6 (gshdsl5): ‘xport/5’
Port  7 (gshdsl6): ‘xport/6’
Port  8 (gshdsl7): ‘xport/7’
Port  9 (gshdsl8): ‘xport/8’
Filter age time: 300

Stored configuration:
Port  1 (ethernet): ‘edd’
Port  2 (gshdsl1): ‘xport/1’
Port  3 (gshdsl2): ‘xport/2’
Port  4 (gshdsl3): ‘xport/3’
Port  5 (gshdsl4): ‘xport/4’
Port  6 (gshdsl5): ‘xport/5’
Port  7 (gshdsl6): ‘xport/6’
Port  8 (gshdsl7): ‘xport/7’
Port  9 (gshdsl8): ‘xport/8’

# MAC Count Filtering configuration
Port 1 (ethernet) Disabled Count(max1=0 max2=0)
Port 2 (gshdsl1) Disabled Count(max1=0 max2=0)
Port 3 (gshdsl2) Disabled Count(max1=0 max2=0)
Port 4 (gshdsl3) Disabled Count(max1=0 max2=0)
Port 5 (gshdsl4) Disabled Count(max1=0 max2=0)
Port 6 (gshdsl5) Disabled Count(max1=0 max2=0)
Port 7 (gshdsl6) Disabled Count(max1=0 max2=0)
Port 8 (gshdsl7) Disabled Count(max1=0 max2=0)
Port 9 (gshdsl8) Disabled Count(max1=0 max2=0)

# FAST mode configuration
FAST mode Disabled
The default port VLAN id of all bridge ports:
Port  0 (CPU):    1
Port  1 (ethernet): N/A
Port  2 (gshdsl1):    2
Port  3 (gshdsl2):    3
Port  4 (gshdsl3):    4
Port  5 (gshdsl4):    5
Port  6 (gshdsl5):    6
Port  7 (gshdsl6):    7
Port  8 (gshdsl7):    8
Port  9 (gshdsl8):    9

# IGMP Snooping configuration
IGMP Snooping Enabled (unknown-flood)
IGMP Snooping timeout: 300

Module ‘gshdsl’:
delete profiles
set profile 1024K 1024 192
set profile 320K 320 192
set profile BW_1024 1152 192
set profile BW_1500 1472 1472
set profile BW_192 192 192
set profile BW_256 256 192
set profile BW_512 512 192
set port 1 BW_192 stuc
set port 2 DEFVAL stuc
set port 3 BW_512 stuc
set port 4 320K stuc
set port 5 BW_256 stuc
set port 6 1024K stuc
set port 7 BW_1024 stuc
set port 8 BW_512 stuc
setname 1 BSM_BDT
setname 2 POLRES
setname 3 684_BNI_4700035-29034
setname 4 814_INDOMARCO
setname 5 815_BTPN
setname 6 BRI_MIGRASI_Gempa
setname 7 DIKNAS_BALAI_BAHASA
setname 8 BRI
delete chs
delete vcps
set ch 1 0 33 616 0 DEFVAL
set ch 1 1 34 3782 0 DEFVAL
set ch 2 0 33 616 0 DEFVAL
set ch 2 1 34 812 0 DEFVAL
set ch 3 0 33 616 0 DEFVAL
set ch 3 1 34 648 0 DEFVAL
set ch 4 0 33 616 0 DEFVAL
set ch 4 1 34 814 0 DEFVAL
set ch 5 0 33 616 0 DEFVAL
set ch 5 1 34 815 0 DEFVAL
set ch 6 0 33 616 0 DEFVAL
set ch 6 1 34 770 0 DEFVAL
set ch 7 0 33 616 0 DEFVAL
set ch 7 1 34 809 0 DEFVAL
set ch 8 0 33 616 0 DEFVAL
set ch 8 1 34 790 0 DEFVAL
disable ports
enable port  1  2  3  4  5  6  7  8

Module ‘snmpr’:

Module ‘vlan1q’:

Module ‘sys’:

Operation Mode: NORMAL (IEEE 802.1D Transparent Bridging)
Chassis ID is 1
Slot ID is 1

UNIX syslog DISABLED
UNIX syslog facility = local 1
UNIX syslog server = 0.0.0.0

Secured host DISABLED
No secured hosts configured.

Module ‘dot1x’:
port period 1 3600
port period 2 3600
port period 3 3600
port period 4 3600
port period 5 3600
port period 6 3600
port period 7 3600
port period 8 3600
dot1x feature is disabled
radius ip 192.168.1.254
radius port 1812
radius secret 1234

Module ‘dhcprelay’:

Module ‘zy_ether’:

Module ‘portcli’:

Module ‘edd’:
The timeout value is 5
The test ip is not assigned

Module ‘ip’:
device add ether      ether  //bridge   mtu 1500  172.19.12.2

subnet add ether.home     . 172.19.12.0      ff:ff:ff:00

rip send    ether    2
rip accept  ether    1 2

route add default          0.0.0.0  172.19.12.1 00:00:00:00 15 # MAN

ipatm lifetime 60

# IP host table:

# Port table:
l2tp       1701/UDP
router     520/UDP
snmp       161/UDP
tftp       69/UDP
telnet     23/TCP

DSL1-D1-BD config>

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: